Dewalt DCN690M2 Cordless Nailer - Toolstop Power Tool Spy Exclusive
Posted by Mark Hunter - April 08, 2013
What would you say if you learned that you could buy a nailer that didn't require gas, was run by a brushless motor and all you needed to do was slot one of your favourite lithium-ion batteries into it?
Well, now you can buy all of that in one brand new, revolutionary nailer from DeWalt.
It's the DeWalt DCN690M2 framing nailer (click here to read our nailer buying guide), it's a world's first and here's everything you need to know about it, thanks to the Toolstop Power Tool Spy.
- it runs off DeWalt's fabled 18v lithium-ion battery family. Slot your new 4.0Ah batteries and get through 600 nails per charge. 600 nails and not a gas cannister or air compressor in sight. It also happily runs off your 3.0Ah 18v li-ion batteries, too
- it's powered by a brush-less motor. Click here to read our guide to understanding why brush-less motors are the future for your power tools. This means longer runtimes, improved power output, and longer motor life
- bump and sequential firing modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- it's all about the up-time. The DCN690M2 features tool-free stall release and easy nail jam access, meaning you're up and running for longer. Couple this with the ability to quickly swap out the 18v 4.0Ah li-ion batteries, and you can start to see how the DCN690M2 is going to revolutionise your world!
Check out the diagram below for more features. Plus check out how compact it is.
Use the comments below to let us know your thoughts on this new nailer from DeWalt, and ask us any questions you may have. Plus, be sure to share this with your power tool loving friends!
blog comments powered by Disqus