Freeze Master 610D Pipe Freezing Kit

• 
• 
• Worried about Security?

Need Expert Advice?

call: 0800 107 8665

submit an enquiry

TOOLSTOP Part No: FRE-610D

Freezemaster 610D Pipe Freezing Kit complete with protective gloves, new style bungee clamps, freeze cream, mains cable,fitted plug and full operating instructions. Available in 110 and 240 volts.

The 610D is made to make building maintenance easy. Fitted with two high capacity freeze heads and supplied with pipe size reducers to freeze pipes from 8mm up to 61mm (or up to 3" steel pipe using the 610 upgrade kit), it is ideal for the engineer who needs to tackle the larger industrial and commercial pipe sizes.

Features:

• The Freeze Master is easy to use - just connect the purpose designed freeze heads to the pipework, upstream and downstream of the area you want to work on and in as little as 5 minutes, two solid ice plugs can be formed allowing you to carry out your repair work quickly and efficiently
• The Freeze Master is safe to use - you can leave the machine unattended, and as long as it is connected to the mains, the freeze will continue indefinitely so unlike a gas freezing system, where a cylinder may run out, there is no danger of ice melting and flooding
• The Freeze Master is not just an alternative to draining down - it represents a fast, clean, efficient and highly professional new service for you to offer your customers and as experience has proved, it is a service they are willing to pay for
• At the heart of every Freeze Master is a unique microprocessor electronic control unit (Active Capillary) - a state-of-the-art innovation designed, developed and patented by Freeze Master Ltd specifically for electric pipe freezing machines
• The compressor achieves lower head pressures resulting in enhanced cooling and ultra rapid pull down temperatures - only genuine Freeze Master machines incorporate this electronic valve control system - also machines built by Freeze Master and name branded for other companies, have the same design features
• Active Capillary (With the Freeze Master valve control) - you can freeze a hot pipe, whilst at the same time freezing a cold pipe, without the risk of a concentration of refrigerant in the freeze head attached to the coolest pipe - you can freeze a large and small pipe with the same benefit.
• The electronic valve system takes the place of the simple capillary and works by delivering pre-programmed quantities of refrigerant to the freeze-heads - this presents several advantages unique to the Freeze Master as a refrigerant to the Freeze Master is electronically distributed maintaining a more stable freeze
• Without Freeze Master control unit whenever a freeze-head is attached to a warm or hot pipe the pressure within the freeze-head is greater than that attached to a cooler pipe - refrigerant will tend to precipitate in the head attached to the coolest pipe - this is detrimental to the freezing effect of the head attached to the warmer pipe
• Every Freeze Master in the range is designed, manufactured and tested to the very highest specification, yet is available for a low capital outlay and the Freeze Master starts to earn its keep the very first time you use it - as many professionals have testified, customers are ready to pay for the use of a machine which is this efficient, safe and clean, and where no drain down or refilling of the water system is required

Comes With:

• Protective gloves
• New Style Bungee Clamps
• Freeze Cream
• Mains cable
• Fitted plug
• Full operating instructions

Back to Top »