Trend DC/HG Diamond Cross Honing Guide
The Trend DC/HG ensures correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone.
Features:
- Roller with alloy body which self-centre clamps bevel edge chisels from 1/4 inch (6.35mm) to 1-1/4 (32mm) and plane irons up to 2- 9/16 inch (65mm) wide
- The setting device is marked for 25 degree and 35 degree angles
- Positive location for roller and blade
- Adjustable stop for setting blade angle
- Use with 63mm (2 1/2 inch) wide x 178mm (7 inch) long bench stones or workshop stones
- Not for use with Firmer chisels or short blade (Butt) chisels
Specification:
- Chisel blade width min: 6.35 mm
- Chisel blade width max: 32 mm
- Plane blade width max: 65 mm
- Plane blade width min: 35 mm
- Angle: 25 deg & 30 deg
- Weight: 0.3kg