CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Chicago Pneumatic CP7782-6 1 Inch Impact Wrench with 6 Inch Extension Anvil

SKU
GEO-CP7782-6
£449.00
£374.17 ex. VAT

Out of stock

Chicago Pneumatic CP7782-6 1 Inch Impact Wrench with 6 Inch Extension Anvil

The new Chicago Pneumatic CP7782-6 series is a durable & powerful 1" air impact wrench with a 6-inch extension. With a reinforced clutch mechanism and low vibration for better operator comfort. It's an affordable tool yet very reliable for tyre fitting centres, general maintenance on heavy vehicles or light industrial maintenance.

Features:

  • 1" D-handle impact wrench with dual retainer (Hole + Ring)
  • Pinless closed reinforced rocking dog impact mechanism
  • Ergonomic side handle
  • Integrated protective cover on the clutch housing
  • Full teasing trigger
  • Regulator with integrated forward/reverse with 3-position power settings in both directions

Specification:

  • Model: CP7782-6
  • Handle type: D-Handle Inside Trigger
  • Square drive: 1"
  • Working Torque Range: (fwd) 370 - 1475 ft.lbs - 500 - 2000
  • Maximum Torque: (reverse) 1920 ft.lbs - 2600 Nm
  • Free speed: 5200 rpm
  • Blows per minute: 500
  • Net weight: 22.2 lb 10.1 kg
  • Power/weight ratio: 86.5 ft.lb/lb -257.4 Nm/kg
  • Length: 14.7" - 370 mm
  • Average air consumption: 10 cfm
  • Actual air consumption: 40.7 cfm
  • Air inlet thread size: 1/2 "
  • Min. hose size: 1/2" - 13 mm
  • Noise level: 100 db(A)
  • Sound Power: 111 db(A)
  • Vibration α (ISO-28927-2): 7.8 m/s_
  • Vibration K (ISO-28927-2): 1.8 m/s_

Videos Hide Videos Show Videos