The Dewalt DCK2102L2T 12V XR SDS Plus Hammer Drill & Drill Driver Twin Pack are fitted with Brushless motors for improved runtime, durability and increased performance
The Dewalt DCK2102L2T is a 12V XR Brushless Twin Pack consisting of the DCH072 SDS Plus Hammer Drill, DCD706 Sub Compact Hammer Drill Driver, 2 x 3.0Ah Batteries, DCB112 Charger and a TSTAK Case. The Dewalt DCH072 is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 14mm. With 1.1 Joules of impact energy and 0-4280 blows per minute, this small SDS Plus Hammer will perform like a much bigger machine but can fit in tight spaces. The DCD706 Hammer Drill Driver has an overall length of only 168mm and is perfect for use in tight, hard-to-reach areas. It features a 15-position adjustable torque control for consistent screw driving into a variety of materials and an LED light to enhance visibility in dull areas.
DCH072 SDS Plus Hammer Features:
- Class leading material removal rate to get the job done quicker than any competitor
- Brushless motor provides improved runtime and durability
- Bright white LED with delay feature improves visibility
- Power and run-time optimized for outstanding performance in an ultra-compact form
DCD706 Drill Driver Features:
- Extremely compact - 38.5mm shorter than the previous generation allows access into tight, hard to reach areas
- Brushless motor for improved runtime, durability and increased performance
- Bright LED light on tool foot for high visibility in low light situations
- New state of charge battery pack allows users to quickly check battery level
- Efficient brushless motor gives 15% more runtime than the previous generation
- Only 1kg (tool only) for ultimate portability and ease of use
- 15 position adjustable torque control for consistent screw driving into a variety of materials
- 25500 BPM hammer mechanism for efficient masonry drilling
- 10mm single sleeve keyless chuck with automatic spindle lock for a quick and easy bit change
- Ergonomic handle gives optimum comfort & control
Comes With:
- 2 x DCB124 3.0Ah batteries
- DCB112 charger
- Side handle
- 2 x Belt hooks
- TSTAK Box
Specification:
DCH072:
- Hand/Arm Vibration - Hammer drilling into concrete: 9.7 m/s²
- Power Source: Cordless
- Tool Holder: SDS-Plus
- Max. drilling capacity in concrete: 14mm
- Max. drilling capacity in metal: 10mm
- Max. drilling capacity in wood: 13mm
- Impact energy: 1.1J
- No load speed: 910rpm
- Blows per Minute: 4280 bpm
DCD706:
- Power Output: 250 UWO
- No Load Speed (rpm): 0-425/0-1500
- Impact Rate: 25500 bpm
- Chuck Capacity: 1.5-10mm
- Max Torque Hard: 57.5 Nm
- Max Torque Soft: 25.5Nm
- Max Drilling Wood (mm): 20
- Max Drilling Metal (mm): 10