FREE Delivery on orders over £99

Next Working Day Delivery

Finance Available over £150

FREE 60 Day Returns

FREE Delivery on orders over £99

Next Working Day Delivery

Finance Available over £150

FREE 60 Day Returns

Dewalt DCK264P2 18V XR Nailer Twin Pack - DCN692 Framing 1st Fix + DCN660 Finishing 2nd Fix (2 x 5.0Ah Batteries) in Tough Box

SKU
DEW-DCK264P2-GB
kr.8,325.03
kr.6,937.53 ex. VAT

Out of stock

Dewalt DCK264P2 18V XR Lithium Ion Cordless Brushless Nailer Twinpack

This is a terrific bundle of 2 Cordless Nailers from Dewalt. Featuring brushless motors and coming with 5Ah batteries, there will be no need to be constantly recharging on site. Suitable for 1st and 2nd fix jobs, everything is covered with these 2 sterling performers.

DCN692 Framing (1st Fix) Nailer DCN660 Finishing (2nd Fix) Nailer
2 x 5Ah Batteries (DCB184) Multi Voltage Battery Charger
DS400 Toughsystem Kitbox  

DCN692 Framing Nailer Features:

  • The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
  • Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
  • Class leading vibration and sound figures offer fantastic user protection
  • Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • Reversible belt/rafter hook provides increased portability and versatility on the job-site
  • Depths can be easily adjusted using the thumb wheel depth adjuster
  • Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
  • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
  • Gas free operation offers a significant saving in running costs
  • Tool free stall/jam clearance minimises user downtime
  • Cordless design so no hanging leads to deal with
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

DCN660 Finishing (2nd Fix) Nailer Features:

  • Benefit from longer runtime, quicker readiness to fire and less recoil
  • Brushless motor technology offers the power to fire a 63mm nail into softwood and 50mm nail into hardwood
  • Tool free stall/jam clearance minimises user downtime
  • Mechanical rather than gas operation offers significant cost savings as well as a consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements
  • Protective pads to lay the tool down on its head
  • The durable magazine accepts 32 to 63mm 16Ga nails
  • Mode selector allows for bump or sequential nailing
  • LED lights with an error notification
  • Easy tool-free clearing of jams and stall release
  • Easy depth adjustment with easy to read gauge

Comes with:

  • 2 x DCB184 5Ah Batteries
  • Multi Voltage Battery Charger
  • Belt hook (reversible) on 1st fix nailer
  • No mark tip x 2 for 1st fix nailer
  • DS400 Toughsystem Kitbox

Specification:

DCN692 Framing Nailer:

  • Nail Diameter: 2.8 - 3.3 mm
  • Magazine angle: 30 - 34°
  • Magazine loading: Rear - load
  • Nail Length: 50 - 90 mm
  • Magazine capacity: Up to 55 Nails
  • Firing mode: Bump & Sequential
  • Length: 345 mm
  • Width: 125 mm
  • Height: 338 mm
  • Nailer Operating Mode: Selective
  • Integrated Belt Hook: Yes
  • Jam Clearing: Yes
  • Impact energy: 105 J
  • Temperature Range: -20 to 50°C
  • Fault indicator: Yes
  • Weight: 4.1 kg

DCN660 Finishing Nailer:

  • Nail Diameter: 1.6 (16Ga) mm
  • Magazine angle: 20°
  • Magazine loading: Rear
  • Nail Length: 32 - 63 mm
  • Magazine capacity: 110 Nails
  • Trigger Type: Bump & Sequential
  • Length: 310 mm
  • Width: 95 mm
  • Height: 305 mm
  • Weight: 2.7 kg
  • Nailer Operating Mode: Bump and Sequential
  • Jam Clearing: Tool free
  • Temperature Range: -20 to 50°C

Videos Hide Videos Show Videos