Dewalt DCN692P2 18V XR Brushless 2 Speed Framing Nailer(2 x 5.0Ah Batteries)
The DCN692P2 is an extremely versatile Dewalt 1st fix nail gun. Its brushless motor technology offers the power to fire a 90mm ring shank nail in softwood and 63mm into hardwoods. You can expect longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails. The two-speed settings optimise the nailer for firing all lengths of nails and it's mechanical rather than gas operation ensures consistent performance.
Features:
- Tool-free stall/jam clearance minimises user downtime
- Gas free operation offers a significant saving in running costs
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Class-leading vibration and sound figures offer fantastic user protection
- Two speeds - or power levels - to optimise the nailer for firing all lengths of nails
- Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
- User can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Reversible belt/rafter hook provides increased portability and versatility on the job-site
- Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
- Cordless design allows you to work without the inconvenience and safety risk of trailing leads
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
- BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- High capacity 5.0Ah XR battery packs offer eXtreme Runtime in both speeds and versatility to share power with your other 18V XR power tools
- Versatile 30 - 34-degree magazine angle will accept most clipped head, and off-centre round head paper tape or wire weld collated framing nails
- Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees Celcius and minimal cleaning/service requirements
Comes with:
- Non-mar tip
- Reversible belt hook
- Multi-voltage XR charger
- Heavy-duty carrying case
- 2x 5.0Ah XR Li-Ion battery packs with state of charge indicator
Specification:
- Weight: 4.1 kg
- Width: 125mm
- Height: 338mm
- Length: 345mm
- Jam Clearing: Yes
- Fault indicator: Yes
- Impact energy: 105 J
- Nail Length: 50 - 90mm
- Magazine angle: 30 - 34°
- Integrated Belt Hook: Yes
- Nail Diameter: 2.8 - 3.3mm
- Magazine loading: Rear-load
- Temperature Range: -20 to 50°C
- Firing mode: Bump & Sequential
- Nailer Operating Mode: Selective
- Magazine capacity: Up to 55 Nails
SKU: DEW-DCN692P2-GB
