Dewalt DCN692P2 18V XR Cordless li-ion Brushless Framing Nailer in Toughsystem Box (2 x 5Ah Batteries)
This eXclusive Toolstop Deal gives you the DCN692 First Fix Framing Nailer complete with 2 x 5.0Ah batteries, charger & DS400 ToughSystem kit box. The DCN692 features a fully brushless motor which offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods. The dry fire lockout ensures that the tool is protected from firing without nails in the magazine ensuring maximum operator safety. This model is extremely versatile with the added bonus of being cord free.
DCN692 Framing Nailer Features:
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees celsius and minimal cleaning/service requirements
- Class leading vibration and sound figures offer fantastic user protection
- Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
- Reversible belt/rafter hook provides increased portability and versatility on the job-site
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
- Gas free operation offers a significant saving in running costs
- Tool free stall/jam clearance minimises user down time
- Cordless design so no hanging leads to deal with
- User can engage contact trip lock-off and prevent accidental discharge of fastener
- Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
Comes with:
- 2 x 5.0Ah Batteries
- DS400 Toughsystem Kitbox
- Multi Voltage Battery Charger
- Belt hook (reversible)
- No mark tip
Specification:
DCN692 Framing Nailer:
- Nail Diameter: 2.8 - 3.3 mm
- Magazine angle: 30 - 34°
- Magazine loading: Rear - load
- Nail Length: 50 - 90 mm
- Magazine capacity: Up to 55 Nails
- Firing mode: Bump & Sequential
- Length: 345 mm
- Width: 125 mm
- Height: 338 mm
- Nailer Operating Mode: Selective
- Integrated Belt Hook: Yes
- Jam Clearing: Yes
- Impact energy: 105 J
- Temperature Range: -20 to 50°C
- Fault indicator: Yes
- Weight: 4.1 kg
SKU: DEW-DCN692P2-K
