Mafell LNF20 Biscuit Jointer comes complete with disc cutter, mounted ejection pipe, hose connector, dust bag, screwdriver for recessed head screws, face pin spanner and carrying case. Available in 110 or 240 volts.
Now with extra features...and all conveniently integrated in the MAXELL-MAX. Ideal for the biscuit jointing fanatics amongst you!
Features:
- One turn of the revolving depth control turret adjusts the tool to all conventional flat dowel sizes
- The tilt stop can be fixed with detents of 0°, 22.5°, 45°, and 67.5° up to 90° Torsion-free cast angle stop and height adjustment make your work easier while 2 sturdy adjusting bolts keep your setting constant even after your 100th cut
- All you need is "on board" in the MAX: practical containers for your dowels, space for the optional pitch pocket cutter, anti-slip mat and of course your LNF 20
- Ergonomic design
- Complete set of accessories included
- With above average 750 watt (1 hp) rating - for professional continuous use
- The on/off switch is easily and conveniently operated with your thumb - for right-handed and left-handed users
Comes with:
- Disc cutter - TCT - 100 x 4 x 22 mm (315/16 x 3/16 x 7/8 in.), 6 teeth
- Ejection pipe - mounted
- Hose connector
- Dust bag cpl
- Screwdriver for recessed head screws
- Face pin spanner
- Carry case
Specification:
- Cutting tool: ∅ 100 mm (315/16 in.)
- Cutting depth: 19 mm (3/4 in.)
- Tilt range: 0 - 90°
- Nominal no-load speed: 9800 rpm
- Normal load speed: 6850 rpm
- Cutting speed (with standard tools)-nominal load: 28.7 m/s (94.2 ft/sec.)
- Universal motor - voltage: 230 volts
- Frequency: 50/60 Hz
- Nominal input: 750 W (1 hp)
- Nominal output: 400 W (0.5 hp)
- Weight: 3.1 kg (6.8 lbs)
- 110 or 240 volts