CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita DHP483ZJ 18V LXT Brushless Combi Drill (Body Only)

SKU
MAK-DHP483ZJ
£135.00
£112.50 ex. VAT

Out of stock

Makita DHP483ZJ 18V LXT Brushless Combi Drill In MakPac Case (Body Only)

The Makita DHP483ZJ brushless compact combi drill has a single sleeve keyless chuck and a new battery protection system providing over-discharge, temperature and circuit protection for enhanced performance. The drill has 20+ torque settings that deliver up to 40 Nm of torque. Featuring a variable 2-speed, reversible, brushless motor for more power and longer run time, it has been specially developed for light drilling and screw work. 

Features:

  • Compact overall length of 176mm
  • Electric brake
  • 2 mechanical gears
  • Variable speed
  • Forward / reverse rotation
  • Twin LED job light to illuminate the workspace
  • Brushless motor for increased runtime, maximum power and long life
  • Single sleeve keyless chuck allows for easy bit installation/removal by one hand
  • Ergonomically designed high comfort grip for reduced fatigue upon use

Comes with:

  • MakPac connector case type 2
  • Inner tray
  • Belt hook

Specification:

  • Chuck Capacity: 1.5 - 13mm
  • Capacity in Masonry: 13mm
  • No Load Speed (Lo): 0 - 500rpm
  • Capacity in Steel: 13mm
  • Blows per Minute (Lo) - ipm: 0 - 7,500ipm
  • Capacity in Wood: 36mm
  • No Load Speed (Hi): 0 - 1,700rpm
  • Blows per Minute (Hi) - ipm: 0 - 25,500ipm
  • Torque Settings: 20 + Drill
  • Vibration: Drilling: 2.5m/sec²
  • Vibration: Hammer Drilling: 10.0m/sec²
  • Vibration K factor: 1.5m/sec²
  • Noise sound pressure: 83dB(A)
  • Noise sound power: 94dB(A)
  • Noise K factor: 3dB(A)
  • Max. Fastening Torque (soft joint): 23Nm
  • Max. Fastening Torque (hard joint): 40Nm