This Makita 18V SDS drill will drill up to 16mm in concrete and 24mm in wood
The DHR165RTJ is a powerful 18V SDS+ Hammer Drill from Makita. It impresses with its 1,600rpm motor and capability to drill up to 16mm in concrete. It features two different operation modes - rotary only and rotary hammer - to suit many tasks the job site may throw at you as well as an LED light for illumination of the workpiece. Embedded with XPT (eXtreme Protection Technology), you can expect greater resistance to the elements when used in outdoor applications or harsh environments.
Features:
- Dual operation mode: Rotary only and rotary hammer allows you to choose the best mode to suit the job you are carrying out
- One-touch slide chuck for SDS-plus bit
- Conveniently located push button for forward and reverse rotation
- LED job light with afterglow illuminates the workpiece for better visibility and precision
- Variable speed control by trigger
- Electric brake
- Torque limiter
- XPT (eXtreme Protection Technology) is a protective seal inside the tool engineered to provide improved water resistance
Comes With:
- Makita DHR165
- 2 x BL1850B 5.0Ah 18V Batteries
- 1 x DC18RC charger
- Side handle
- Depth stop
- Makpac case
Specification:
- Voltage: 18V
- Capacity in Concrete: 16 mm
- Capacity in Steel: 13 mm
- Capacity in Wood: 24 mm
- Impact energy: 1.3 J
- Shank: SDS PLUS
- Blows per minute Impact: 0 - 5,300 bpm
- Noise sound pressure: 88 dB(A)
- Noise sound power: 99 dB(A)
- Noise K factor: 3 dB(A)
- Maximum Output: 400 w
- No Load Speed: 0 - 1,600 rpm
- Vibration K factor: 1.5 m/sec²
- Vibration: Hammer Drilling: 12.0 m/sec²
SKU: MAK-DHR165RTJ
