Makita DHR242RMJ 18 Volt LXT lithium ion SDS Plus Brushless 3 Mode Rotary Hammer Drill complete with Battery Charger, 2 x 4Ah Batteries, Makpac Carry Case, Depth Gauge and Side Handle
The Makita DHR242 SDS+ Brushless ROTARY HAMMER is given huge power by a 4.0Ah 18v Li-ion battery. It features strong effective performance combined with ergonomic design. Built with the operator in mind the DHR242 has a centre of gravity closer to the vibration absorbing handle, this design gives unrivalled tool balance which in turn reduces the operators fatigue and gives a more productive working day. Makita's Lithium-ion battery is the quickest, lightest and most powerful battery technology to date. At 40% lighter, 2000+ charging cycles, 430% more run time and an incredible charge time of 30 minutes (4Ah batteries) the Makita Lithium-ion system is a formidable force for any job.
DHR242 Features:
- Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model DHR200
- One touch slide chuck for SDS-plus bit
- Easy-to-grip handle
- Ergonomically designed to give maximum power thrust
- Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
- The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
- Higher productivity than model DHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
Comes with:
- Battery charger
- 2 x 4.0Ah li-ion batteries
- Makpac Carry case
- Depth gauge
- Side handle
PLEASE NOTE - video shows older model rotary hammer with same specification
Machine compatible with Makita BL1830, BL1840 and BL1850 batteries
Specification:
- Max in Steel: 13mm
- Max in Wood: 27mm
- Max in Concrete: 24mm
- No Load Speed: 0-950rpm
- Blows per minute: 0-4,700bpm
- Single impact energy: 2.0J
- Vibration: 15/sec2
- Charging Time: Approx 30 min
- Net Weight: 3.3kg
SKU: MAK-DHR242RMJ
