Makita DHR243ZJ 18V Brushless SDS Plus Rotary Hammer 24mm With Quick Change Chuck (Body Only)
The Makita DHR243 SDS+ Brushless rotary hammer with its quick change chuck allows you to easily go between SDS+ drill bits and straight shank drill bits. It features strong effective performance combined with ergonomic design. Built with the operator in mind the DHR243 has a centre of gravity closer to the vibration absorbing handle, this design gives unrivalled tool balance which in turn reduces the operator's fatigue and gives a more productive working day.
Features:
- Supplied with Quick Change Chuck
- Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
- One touch slide chuck for SDS-plus bit
- Easy-to-grip handle ergonomically designed to give maximum power thrust, provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- 3 mode operation: Rotation + Hammering, Hammering only, Rotation only
- The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers
- Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
Comes with:
- Quick Change Chuck
- Depth stop
- Side handle
- MakPac Case
Specification:
- Capacity in Concrete: 24mm
- Capacity in Steel: 13mm
- Capacity in Wood: 27mm
- Impact energy: 2.0 J
- Blows per minute: 0 - 4700 bpm
- No Load Speed: 0 - 950 rpm
- Vibration: Drilling 3.5 m/sec²
- Vibration K factor 1.5 m/sec²
- Vibration: Hammer Drilling 13.5 m/sec²
- Vibration: Chiselling 10.5 m/sec²
- Net weight: 3.2 - 3.7 kg
SKU: MAK-DHR243ZJ
