Makita DLX2069MX 18V 3 Piece Kit & DCL180Z Vacuum - DHP456 Combi Drill, DHR263 Rotary Hammer & DTM50Z Multicutter (4 x 4.0Ah Batteries)

SKU: DEAL-00054

View all Makita products

Makita DLX2069MX 18V 3 Piece Kit & DCL180Z Vacuum - DHP456 Combi Drill, DHR263 Rotary Hammer & DTM50Z Multicutter (4 x 4.0Ah Batteries) - 5

Makita DLX2069MX2 18 Volt LXT Lithium-Ion 2-Piece Cordless Power Tool Kit complete with DHP456 Combi Drill, DHR263 SDS+ Rotary Hammer (3-Mode) + DTM50Z LXT 18V Oscillating Multicutter (Body Only) + DCL180Z 18V Vacuum Cleaner (Body Only) with 4 x 4Ah Batteries and a Heavy Duty Carry Bag

This eXclusive Toolstop Deal consists of the Makita DLX2069MX2 kit which comes with 4 x 4.0Ah batteries, Oscillating Multicutter and Vacuum. The DHP456 combi drill will take 1 battery but the DHR263 takes 2 making it a 36 volt machine effectively.

DHP456 Combi Drill Features:

4 pole motor - delivers high power to weight ratio
Conveniently located push button for forward and reverse
High comfort handle - ribbed rubber grips enable all finger tips to hold handle securely
2 speed metal gearbox - ensures high transmission durability
Forward/reverse rotation
Variable speed trigger
Electronic brake
LED Job light - with afterglow function. Light can be turned on before tool starts by pulling trigger slightly

DHR263 Rotary Hammer Features:

Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system
Compact design that maintains the same easy handling and high manoeuvrability as the BHR262
LED Job light with pre-glow and afterglow functions
3 mode operation - Rotation + Hammering - Hammering only - Rotation only
When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty
One touch slide chuck for SDS-plus bit
Ergonomic soft grip
Battery capacity warning lamp
40 different bit-angle settings

Comes With:

Battery Charger (DC18RC)
4 x 4.0Ah Li-Ion Batteries (BL1840)
Heavy Duty Carry Bag

DTM50Z Multicutter

Powerful and versatile tool with 3.2° oscillation angle for cutting, sanding and scraping materials. Suitable for use with wood, stone, plastic, metal and plasterboard. This tool has endless capabilities.

Features:

Hex wrench holder on body
Variable speed control dial
Accessories can be installed at 30° increments, across 360°
Uses OIS Interface
Thumb On/Off switch, positioned for ease of use when holding body of machine
Anti-restart function prevents accidental start-ups

DCL180Z Vacuum

The Makita DCL180 is an optimum cordless cleaner of cloth filtration type powered by a Makita Li-ion battery. Strong suction power and large dust capacity of 0.65 Litres for heavy-duty applications.

Features:

Lightweight
Quick Dust Disposal - cloth filter enables disposal of dust easily by removing capsule. No paper filter to replace.
Ideal for vehicle cleaning or just tidying up on the jobsite
Strong suction power and large dust capacity for heavy duty applications
Low noise design

Machines compatible with Makita BL1830, BL1840 and BL1850 batteries

Specification:

Combi Drill DHP456:

Max. in Steel: 13mm
Max. in Wood: 38mm
Max in Masonary: 13mm
Torque settings: 16 + drill
Max. Torque: 36/50
Blows per minute: High - 0-22500, Low - 0-6000 bpm
No load speed: High - 0-6000, Low - 0-1500 rpm
Net Weight: 1.6kg

Rotary Hammer DHR263:

Battery voltage: 2 x 18V
Max. in steel: 13mm
Max. in wood: 32mm
Max in concrete: 26mm
No load speed: 0-1,200 rpm
Impacts per minute: 0-4,800bpm
Chuck type: SDS plus (standard)
Operation modes: 3 modes
Net weight: 4.7kg

Multicutter DTM50Z:

Battery type: Lithium-ion
Voltage: 18V
Oscillations per min: 6,000-20,000
Oscillation angle: 3.2°
Charging time: 22 mins
Net weight: 2.0kg

Vacuum DCL180Z:

Max air flow: 1.3m3/min
Max sealed suction: 3.6kPa
Capacity: 0.65 litre
Continuous Use: 20 Minutes
Charging Time: Approx 22 Minutes
18 Volts
Net weight: 1.2kg