Makita DLX2069PMJ 18 volt LXT Lithium-Ion 2-Piece Cordless Power Tool Kit complete with DHP456 Combi Drill, DHR263 SDS+ Rotary Hammer (3-Mode), 4 x 4Ah Batteries, DC18RD Twin Port Charger and 2 x Makpac Connector Cases
The Makita DLX2069PMJ kit comes with 4 x 4.0Ah batteries. The DHP456 combi drill will take 1 battery but the DHR263 takes 2 batteries making it a 36 volt machine effectively. These two machine are both well established models of bulletproof build quality supplied with plenty of power and a twin charger to keep you going whatever the workload.
DHP456 Combi Drill Features:
- 4 pole motor - delivers high power to weight ratio
- Conveniently located push button for forward and reverse
- High comfort handle - ribbed rubber grips enable all finger tips to hold handle securely
- 2 speed metal gearbox - ensures high transmission durability
- Forward/reverse rotation
- Variable speed trigger
- Electronic brake
- LED Job light - with afterglow function. Light can be turned on before tool starts by pulling trigger slightly
DHR263 Rotary Hammer Features:
- Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system
- Compact design that maintains the same easy handling and high manoeuvrability as the BHR262
- LED Job light with pre-glow and afterglow functions
- 3 mode operation - Rotation + Hammering - Hammering only - Rotation only
- When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty
- One touch slide chuck for SDS-plus bit
- Ergonomic soft grip
- Battery capacity warning lamp
- 40 different bit-angle settings
Comes with:
- DC18RD Twin Port Charger
- 4 x 4.0Ah Li-Ion Batteries (BL1840)
- 2 x Makpac Connector Cases
- 194683-7 100ml grease
- Makita wipe cloth
PLEASE NOTE - toolbag shown in video is replaced by MakPac carry cases in this product
Specification:
Combi Drill DHP456:
- Max. in Steel: 13mm
- Max. in Wood: 38mm
- Max in Masonary: 13mm
- Torque settings: 16 + drill
- Max. Torque: 36/50
- Blows per minute: High - 0-22500, Low - 0-6000 bpm
- No load speed: High - 0-6000, Low - 0-1500 rpm
- Net Weight: 1.6kg
Rotary Hammer DHR263:
- Battery voltage: 2 x 18V
- Max. in steel: 13mm
- Max. in wood: 32mm
- Max in concrete: 26mm
- No load speed: 0-1,200 rpm
- Impacts per minute: 0-4,800bpm
- Chuck type: SDS plus (standard)
- Operation modes: 3 modes
- Net weight: 4.7kg
SKU: MAK-DLX2069PMJ
