CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita DLX2181 Twinpack with DHP454 Combi drill, DTD154 Impact Driver, DC18RC Charger (2 x 3Ah Batteries)

SKU
DEAL-00256
£289.00
£240.83 ex. VAT

Out of stock

Makita DLX2181 Twinpack with DC18RC Charger (2 x 3Ah Batteries)

This eXclusive Toolstop deal consists of the DLX2181 Twinpack which is the DHP484 Combi Drill and the DTD154 Impact Driver. Also with this deal is the DC18RC single charger and 2 BL1830B 3.0Ah Batteries all stored in a Makpac Connector Case Type 3.

DHP484 Combi Drill Features:

  • Brushless motor
  • Electric brake
  • 2 mechanical gears.
  • Variable speed control by trigger
  • Forward/reverse rotation
  • LED job light
  • Compact Overall Length of 182mm
  • Keyless Chuck
  • Aluminium Gear Housing
  • All metal gear construction
  • Ergonomic soft grip

DTD154 Impact Driver Features:

  • T-mode: Tightening mode for self-drilling screw
  • Electronic 3-stage impact power selection (Hard/Medium/Soft)
  • Brushless motor
  • One touch sliding chuck for easy bit installation and removal.
  • LED job light
  • Ergonomic soft grip
  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • Compact overall length

DC18RC Features:

  • The DC18RC has a cooling fan and Active 3 Controls
  • This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
  • The cooling system blows cool air into the battery
  • As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated

BL1830B Features:

  • Lightweight and shock-absorbing
  • Delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH
  • Minimal depletion of power during use or in storage over it's lifetime
  • Foam cell technology
  • Slide on battery
  • Firm holding with multi contacts and shock absorbing pack
  • Will not puncture and remains cool even in heavy use
  • Reaches full charge in 30 minutes or less
  • Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge

Specification:

DHP484:

  • Voltage: 18 v
  • Capacity in Steel: 13 mm
  • Capacity in Wood: 38 mm
  • Chuck Capacity: 1.5 - 13 mm
  • Capacity in Masonry: 13 mm
  • Blows per Minute (Hi) - ipm: 0 - 30,000 ipm
  • Blows per Minute (Lo) - ipm: 0 - 7,500 ipm
  • Noise sound pressure: 88 dB(A)
  • Noise sound power: 99 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed (Hi): 0 - 2,000 rpm
  • No Load Speed (Lo): 0 - 500 rpm
  • Torque Settings: 21 + drill
  • Max. Fastening Torque (Soft Joint): 30 Nm
  • Max. Fastening Torque (Hard Joint): 54 Nm
  • Vibration K factor: 1.5 m/sec_
  • Vibration: Impact drilling into concrete: 8.0 m/sec_
  • Vibration: Drilling into metal: 2.5 m/sec_
  • Net weight: 1.8 kg

DTD154:

  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M14
  • Coarse thread (length): 22 - 125 mm
  • Max Fastening Torque: 175 Nm
  • Vibration: Fastening Bolt: 12.5 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • Net weight: 1.5 kg
  • Impact Selection: 3 stage + Tek mode
  • Driving Shank: 6.35mm (1/4") Hex
  • Blows per Minute (Hi) - ipm: 0 - 3800 ipm
  • Blows per Minute (Med) - ipm: 0 - 2600 ipm
  • Blows per Minute (Lo) - ipm: 0 - 1100 ipm
  • Machine Screw: M4-M8
  • No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm