Makita DLX2181JX1 Brushless Cordless Twinpack Kit DHP484Z & DTD154Z (Body Only)
The Makita DLX2181JX1 is a cordless twinpack that consists of the DHP484 Combi Drill and the DTD154 Impact Driver. This kit comes in a Type 3 Makpac connector case and without batteries and a charger.
DHP484 Combi Drill Features:
- Brushless motor
- Electric brake
- 2 mechanical gears.
- Variable speed control by trigger
- Forward/reverse rotation
- LED job light
- Compact Overall Length of 182mm
- Keyless Chuck
- Aluminium Gear Housing
- All metal gear construction
- Ergonomic soft grip
DTD154 Impact Driver Features:
- T-mode: Tightening mode for self-drilling screw
- Electronic 3-stage impact power selection (Hard/Medium/Soft)
- Brushless motor
- One touch sliding chuck for easy bit installation and removal.
- LED job light
- Ergonomic soft grip
- Electric brake
- Variable speed control by trigger
- Forward/reverse rotation
- Compact overall length
Specification:
DHP484:
- Voltage: 18 v
- Capacity in Steel: 13 mm
- Capacity in Wood: 38 mm
- Chuck Capacity: 1.5 - 13 mm
- Capacity in Masonry: 13 mm
- Blows per Minute (Hi) - ipm: 0 - 30,000 ipm
- Blows per Minute (Lo) - ipm: 0 - 7,500 ipm
- Noise sound pressure: 88 dB(A)
- Noise sound power: 99 dB(A)
- Noise K factor: 3 dB(A)
- No Load Speed (Hi): 0 - 2,000 rpm
- No Load Speed (Lo): 0 - 500 rpm
- Torque Settings: 21 + drill
- Max. Fastening Torque (Soft Joint): 30 Nm
- Max. Fastening Torque (Hard Joint): 54 Nm
- Vibration K factor: 1.5 m/sec_
- Vibration: Impact drilling into concrete: 8.0 m/sec_
- Vibration: Drilling into metal: 2.5 m/sec_
- Net weight: 1.8 kg
DTD154:
- Standard Bolt: M5-M16
- High Tensile Bolt: M5-M14
- Coarse thread (length): 22 - 125 mm
- Max Fastening Torque: 175 Nm
- Vibration: Fastening Bolt: 12.5 m/sec_
- Vibration K factor: 1.5 m/sec_
- Noise sound pressure: 96 dB(A)
- Noise sound power: 107 dB(A)
- Noise K factor: 3 dB(A)
- Net weight: 1.5 kg
- Impact Selection: 3 stage + Tek mode
- Driving Shank: 6.35mm (1/4") Hex
- Blows per Minute (Hi) - ipm: 0 - 3800 ipm
- Blows per Minute (Med) - ipm: 0 - 2600 ipm
- Blows per Minute (Lo) - ipm: 0 - 1100 ipm
- Machine Screw: M4-M8
- No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm
SKU: MAK-DLX2181JX1
