Makita DLX2221BT2 18V DTD155 Impact Driver and DHP483 Combi Drill Twinpack (2 x 5.0Ah Batteries)
The Makita DLX2221BT2 is the DLX2221J twin kit in an exclusive black finish. It's a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x BL1850B 5.0Ah Batteries, DC18RC Fast Charger and a Makpac Type 3 Connector Case.
DHP483 Features:
- Variable 2-speed, reversible, Makita Brushless Motor
- Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
- Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
- 20 clutch settings deliver up to 40 Nm of torque
- All metal gears for more efficient power transmission
- Ultra-compact design (only 176mm long)
- Twin led jobs light with pre-glow and after-glow functions
- Ergonomically designed high comfort grip
- Specially developed for light drilling / screw work
DTD155 Features:
- 3 operating modes allow a wide range of applications: 2 speed levels + "A Mode"
- "Assist Mode": Assisted screwing with push button, soft & slow start -> automatic acceleration -> tightening with maximum speed
- BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life
- Enhanced moisture and dust protection with the XPT system (eXtreme Protection Technology)
- Ergonomic design for optimum hand control
- Ergonomic handle with soft coating for high working comfort
- One-touch bit installation with 1/4" hex chuck
- Powerful double LED lighting
- Electric brake
- Variable speed control by trigger
- Forward and reverse rotation
Comes With:
- DC18RC Charger
- 2 x BL1850B 5.0Ah Batteries
- B-57015 38 Piece Bit Set
- MakPac Type 3 Connector Case
Specification:
DHP483:
- Voltage: 18v
- Soft Application Max Torque (Nm): 23
- Hard Application Max Torque (Nm): 40
- Torque Settings: 20 + Drill
- Brake Type: Electric
- No. of Gears: 2
- LED Job Light: Yes / Twin / Pre-glow
- Battery Capacity Indicator: No
- Battery Compatibility: 18v Lithium-Ion (LXT)
- Rotation: Forward / Reverse
- Variable Speed Control Trigger: Yes
- No Load Speed (RPM) High: 0-1,700
- No Load Speed (RPM) Med: N/A
- No Load Speed (RPM) Low: 0-500
- Chuck Type: 3-Jaw / Single Sleeve Keyless
- Chuck Capacity (mm): 1.5 - 13
- Screw Capacity: Machine Screw (mm): 6
- Screw Capacity: Wood Screw (mm): 6 x 75
- Drill Capacity: Concrete (mm): 13
- Drill Capacity: Metal (mm): 13
- Drill Capacity: Wood (mm): 36
- Impact Rate (BPM) High: 0-25500
- Impact Rate (BPM) Med: N/A
- Impact Rate (BPM) Low: 0-7500
- Overall Length (mm): 176
- Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
- Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
- Brushless Motor: Yes
DTD155:
- Voltage: 18v
- Max Torque (Nm): 140
- Brake Type: Electric
- LED Job Light: Yes / Twin
- Battery Capacity Indicator: No
- Battery Compatibility: 18v Lithium-Ion (LXT)
- Rotation: Forward & Reverse
- Variable Speed Control Trigger: Yes
- No Load Speed (RPM): H: 0-3000 S: 0-1300
- Machine Screw Capacity: M4-M8
- Standard Bolt Capacity: M5-M14
- High Tensile Bolt Capacity: M5-M12
- Coarse Thread Length Capacity (mm): TBC
- Max. Impacts Per Minute (ipm): H: 0-3900 S: 0-1600
- Driving Shank: 1/4" Hex
- Overall Length (mm): 135
- Net Weight (Kg with 1.5/2Ah Battery): 1.2
- Net Weight (Kg with 3/4/5Ah Battery): 1.5
- Brushless Motor: Yes