Makita DLX2221J LTX 18V 2 Piece Kit - DHP483 Combi + DTD155 Impact Driver, DC18RC Charger and Makpac Type 3 Connector Case (2 x 3.0Ah Batteries)
The DLX2221J from Makita is a Cordless 18V Kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring Electronic 2-speed Impact Power Selection. The Impact driver has been developed as an 18V version of TD111D. The Kit comes with 2 x 1830B 3.0Ah Batteries, DC18RC Fast Charger and a Makpac Type 3 Connector Case.
DHP483 Features:
- Compact overall length of 176mm
- Electric brake
- 2 mechanical gears
- Variable speed
- Forward/reverse rotation
- Twin LED job light
- Brushless motor
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand.
- Ergonomically designed high comfort grip.
- Belt hook
DTD155 Features:
- New impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading" by driving at low speed until the start of tightening
- Brushless motor
- Electronic 2-speed Impact Power Selection
- Electric brake
- Variable speed control by trigger
- Forward/reverse rotation
- LED job light
- One-touch bit installation
- Ergonomically designed high comfort grip.
- Slim motor housing
Comes With:
- DC18RC Charger
- 2 x 3.0Ah Batteries
- Type 2 Makpac Connector Case
Specification:
DHP483:
- Capacity in Steel: 13 mm
- Capacity in Wood: 36 mm
- Chuck Capacity: 1.5 - 13 mm
- Capacity in Masonry: 13 mm
- Blows per Minute (Hi) - ipm: 0 - 25,500 ipm
- Blows per Minute (Lo) - ipm: 0 - 7,500 ipm
- No Load Speed (Hi): 0 - 1,700 rpm
- No Load Speed (Lo): 0 - 500 rpm
- Voltage: 18 v
- Torque Settings: 20 + Drill
- Battery Type: Lithium-ion
- Vibration: Drilling: 2.5 m/sec_
- Vibration: Hammer Drilling: 10.0 m/sec_
- Vibration K factor: 1.5 m/sec_
- Noise sound pressure: 83 dB(A)
- Noise sound power: 94 dB(A)
- Noise K factor: 3 dB(A)
- Max. Fastening Torque (Soft Joint): 23 Nm
- Max. Fastening Torque (Hard Joint): 40 Nm
- Net weight: 1.6 kg
DTD155:
- Battery Type: Lithium-ion
- Voltage: 18 v
- Impact Selection: 2 Stage + Assist mode
- Driving Shank: 6.35mm (1/4") Hex
- Blows per Minute (Hi): 0 - 3900 ipm
- Blows per Minute (Lo): 0 - 1600 ipm
- Machine Screw: M4-M8
- Standard Bolt: M5-M14
- High Tensile Bolt: M5-M12
- Coarse thread (length): 22 - 90 mm
- Noise sound pressure: 94 dB(A)
- Noise sound power: 105 dB(A)
- Noise K factor: 3 dB(A)
- No Load Speed (Hi): 0 - 3000 rpm
- No Load Speed (Lo): 0 - 1300 rpm
- Max Fastening Torque: 140 Nm
- Vibration: Fastening Bolt: 14.0 m/sec_
- Vibration K factor: 1.5 m/sec_
- Net weight: 1.4 kg
SKU: MAK-DLX2221J
