CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita DTD155Z 18V LXT Brushless Impact Driver (Body Only)

SKU
MAK-DTD155Z
£99.00
£82.50 ex. VAT

Out of stock

Makita DTD155Z 18V LXT Brushless Impact Driver (Body Only)

The Makita DTD155Z impact driver has been developed as an 18V version of the TD111D. It features a fully brushless motor for increased run time, maximum power and long life as well as a new impact mode to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. It has a slim motor housing and an ergonomic soft-grip handle for reduced fatigue upon use.

Features:

  • New impact mode (A-mode) helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening
  • Brushless motor for increased run time, maximum power and long life
  • Electronic 2-speed Impact Power Selection
  • Electric brake
  • Variable speed control by trigger
  • Forward / reverse rotation
  • LED job light to illuminate the workspace
  • Ergonomically designed high comfort grip
  • Slim motor housing

Specification:

  • Standard Bolt: M5-M14
  • High Tensile Bolt: M5-M12
  • Coarse thread (length): 22 - 90mm
  • Max Fastening Torque: 140Nm
  • Vibration: Fastening Bolt: 14.0m/sec²
  • Vibration K factor: 1.5m/sec²
  • Noise sound pressure: 94dB(A)
  • Noise sound power: 105dB(A)
  • Noise K factor: 3dB(A)
  • Impact Selection: 2 Stage + Assist mode
  • Driving Shank: 6.35mm (1/4") Hex
  • Blows per Minute (Hi) - ipm: 0 - 3900ipm
  • Blows per Minute (Lo) - ipm: 0 - 1600ipm
  • Machine Screw: M4-M8
  • No Load Speed (Hi): 0 - 3000rpm
  • No Load Speed (Lo): 0 - 1300rpm