Makita DTD155Z 18V LXT Brushless Impact Driver (Body Only)
The Makita DTD155Z impact driver has been developed as an 18V version of the TD111D. It features a fully brushless motor for increased run time, maximum power and long life as well as a new impact mode to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. It has a slim motor housing and an ergonomic soft-grip handle for reduced fatigue upon use.
Features:
- New impact mode (A-mode) helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening
- Brushless motor for increased run time, maximum power and long life
- Electronic 2-speed Impact Power Selection
- Electric brake
- Variable speed control by trigger
- Forward / reverse rotation
- LED job light to illuminate the workspace
- Ergonomically designed high comfort grip
- Slim motor housing
Specification:
- Standard Bolt: M5-M14
- High Tensile Bolt: M5-M12
- Coarse thread (length): 22 - 90mm
- Max Fastening Torque: 140Nm
- Vibration: Fastening Bolt: 14.0m/sec²
- Vibration K factor: 1.5m/sec²
- Noise sound pressure: 94dB(A)
- Noise sound power: 105dB(A)
- Noise K factor: 3dB(A)
- Impact Selection: 2 Stage + Assist mode
- Driving Shank: 6.35mm (1/4") Hex
- Blows per Minute (Hi) - ipm: 0 - 3900ipm
- Blows per Minute (Lo) - ipm: 0 - 1600ipm
- Machine Screw: M4-M8
- No Load Speed (Hi): 0 - 3000rpm
- No Load Speed (Lo): 0 - 1300rpm
SKU: MAK-DTD155Z
