Makita DTR180ZK 14.4-18V Brushless Rebar Tying Tool LXT (Body Only)
The Makita DTR180ZK rebar tying tool features a fully brushless motor for long life and maximum power. Tying rebars can be done automatically for a range of applications such as building concrete foundations. The adjustable tying strength allows the strength to be adjusted in 6 stages according to the condition of the tying material. Its low weight means it can be operated using only the one hand thereby allowing the other to be free to adjust the position of the rebar. It has 2 operating modes (Single or continuous action). Continuous action mode is used for efficient continuous tying. The user can tie rebars by only pulling the contact arm against rebars if they continuously hold the trigger.
Does not include battery pack or charger.
Features:
- On-Tool storage of Hex wrench
- Ergonomically designed handle with soft grip for maximum comfort
- Tie wire reel can be replaced simply by opening reel cover
- 0.8mm annealed wire
- 120 ties per reel with 5.0Ah battery
Comes with:
- Belt clip
- Carry case
Specification:
- Battery Type: Lithium-ion
- Voltage: 14.4 / 18 v
- Maximum Power Output: 340 w
- Net weight: 2.3 - 2.6 kg
- Vibration no load: 2.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 78 dB(A)
- Noise K factor: 3 dB(A)
- Tie wire: 0.8mm annealed wire
- Applicable rebars: D10 x D10 - (D13x2) x (D13x2)
- Approx ties per reel: 120 (with 5.0Ah battery)
SKU: MAK-DTR180ZK
