CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita HP2050F 110V 13mm 2 Speed Percussion Drill

SKU
MAK-HP2050F-110V
£135.00
£112.50 ex. VAT

Out of stock

Makita HP2050F 13mm 2-Speed Percussion Drill complete with side handle, depth gauge and job light. Available in 110 or 240 volts.

Features:

  • Extra-low vibration level for reduced operator fatigue
  • Dual purpose for 'Rotation Only' and 'Rotation with hammering'
  • Built-in torque limiter stops bit rotation when hitting reinforcements
  • Industrial strength keyed chuck
  • Impact resistant contoured handle with rubber cushion
  • Metal gear housing for durability and long tool life
  • Built-in shock-proof, high output, white L.E.D. light illuminates drilling edge and increases visibility with a bulb that never needs replacing throughout the life of the tool
  • Powerful 6.6 AMP motor and lightest tool on the market (5.1 lbs.)
  • Positive Stop Mode Selctor prevents accidental mode disengagement
  • Large trigger switch and 360¬∞ swivel side handle for added comfort
  • Recessed lock-on button for continuous use
  • Ball bearing construction for longer motor life
  • Ergonomic and well balanced design
  • Air vent holes supply required ventilation while protecting motor from dust and dirt
  • 2 mechanical gears
  • Forward/reverse rotation
  • Double insulated

Comes with:

  • Side handle
  • Depth gauge
  • Job light

Specification:

  • Max in Steel: Hi 8mm / Lo 13mm
  • Max in Wood: Hi 25mm / Lo 40mm
  • Max in Masonry: Hi 13mm / Lo 20mm
  • Blows per minute: Hi 0-58,000bpm / Lo -24,000bpm
  • No Load Speed: Hi 0-2,900rpm / Lo 0-1,200rpm
  • Input wattage: 720w
  • Net Weight: 2.5kg
  • 110 or 240 volts