With its built-in LED light, you can expect precision drilling every time with this rotary drill
The Makita HR3210FCT SDS Plus rotary hammer drill has been developed as a successor model of the HR3000C, featuring a low vibration level and lightweight design. It is powered by an 850watt motor, generating 6.4 joules of impact energy which allows it to punch a 32mm hole into concrete with ease. Makita's AVT (Anti-Vibration Technology) protects both the operator from physical injury and the machine from mechanical and electrical overload. A built-in balancer moves in the opposite direction from the piston providing the hammer action, thus cancelling out the majority of vibration being transferred back through the machine. This model features a built-in LED job light for precision every time and comes supplied with a quick change chuck and adaptor.
Features:
- Soft start
- Built-in job light
- Constant speed under load
- Torque limiter: The drill stops when the bit hits against reinforcements
- Will punch a 32mm hole into concrete and drive a 90mm CT core cutter
- 2-Mass fulcrum hinged rear grip handle and the vibration-damping side handle to further limit HAV risks
- Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available
- This 3-function machine provides rotary-only operation for drilling with a no-load speed of between 315 and 630rpm
- Rotary action with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and demolition work
- The HR3210FCT has variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation
- Anti Vibration Technology system uses the pneumatic pressure generated in the hammer piston chamber to move a counterbalance in the opposite direction to dampen out the impact vibrations at the steel point
Comes with:
- Bit grease
- Carry case
- Depth stop
- Side handle
- Quick change chuck and adaptor
Specification:
- Impact energy: 5.0 J
- Max in concrete: 32 mm
- Impacts per minute: 1650 - 3300 ipm
- Input Wattage: 850 w
- Max core diameter (TCT): 90 mm
- Vibration K factor: 1.5 m/sec²
- Net weight: 5.2 - 5.6 kg
- No Load Speed: 315 - 630 rpm
- Vibration: Drilling: 2.5 m/sec²
- Vibration: Chiselling: 7 m/sec²
- Vibration: Hammer Drilling: 10 m/sec²
- Noise sound pressure: 89 dB(A)
- Noise K factor: 3 dB(A)
- Noise sound power: 100 dB(A)
SKU: MAK-HR3210FCT-240V
