Trend 250mm Sawblade Triple Pack - 48T, 60T and 80T
This eXclusive Toolstop Deal consists of Trend CSB/25048 CraftPro Saw Blade 250mm x 48 Teeth x 30mm, Trend CSB/25060 CraftPro Saw Blade 250mm x 60 Teeth x 30mm and Trend CSB/25080 CraftPro Saw Blade 250mm x 80 Teeth x 30mm. All 3 sawblades are intended to be used in portable or stationary sawing machines. Featuring quality carbide tips for high wear resistance. Compatible with all sawing machines though bushing washers may be required for some models. With a reamed bore to ensure precise fit to spindle.
CSB/25048
CraftPro Tungsten Carbide Tipped Combination Sawblades are designed for a medium finish in softwood, hardwood, exotic timber, plasterboard, and cement bonded board.
Features:
- Silverbraze to ensure tip is bonded securely to body
- Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2
- The Trend name for traceability and a guarantee of quality
- High grade alloy steel plate body precision ground to maintain flatness
- Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials
- Warranty: 12 months
Comes With:
- 1 X 30-16mm bushing washer
- 1 X 30-20mm bushing washer
- 1 X 30-25.4mm bushing washer
CSB/25060
CraftPro Tungsten Carbide Tipped Trimming / Crosscut Sawblades are designed for a medium to fine finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. With more teeth which is preferred for cutting across the grainof hard and soft wood. Finer finish and a slower feed rate.
Comes With:
- 1 X 30-16mm bushing washer
- 1 X 30-20mm bushing washer
- 1 X 30-25.4mm bushing washer
CSB/25080
CraftPro Tungsten Carbide Tipped. Fine Trim / Finishing Sawblades are designed give a extra fine finish and are suited to cutting veneers, plywood, boards veneered on both sides, hardboards, MDF and particle boards with plastic laminate on one side. More teeth are preferred for cutting across the grain of hard and soft wood. Finer finish and a slower feed rate.
Comes With:
- 1 X 30-16mm bushing washer
- 1 X 30-20mm bushing washer
- 1 X 30-25.4mm bushing washer
Specification:
CSB/25048
- D: 10 inches
- D: 250 mm
- Bore: 30 mm
- Kerf: 3.0 mm
- Plate thick: 2.0 mm
- No. of Teeth: 48
- Tooth form: ATB
- Hook: 15 degrees
- Quick Selector No.:25
- Colour Code: Red
- Type: Combination
- Weight: 0.731 Kg
- Packaged Size: 347 x 300 x 8mm
CSB/25060
- D: 10 inches
- D: 250 mm
- Bore: 30 mm
- Kerf: 3.0 mm
- Plate thick: 2.0 mm
- No. of Teeth: 60
- Tooth form: ATB
- Hook: 15 degrees
- Quick Selector No.:25
- Colour Code: Orange
- Type: Trimming/Crosscut
- Nett Weight: 0.737 Kg
- Packaged Size: 347 x 300 x 8mm
CSB/25080
- D: 10 inches
- D: 250 mm
- Bore: 30 mm
- Kerf: 3.0 mm
- Plate thick: 2.0 mm
- No. of Teeth: 80
- Tooth form: ATB
- Hook: 15 degrees
- Quick Selector No.:25
- Colour Code: Yellow
- Type: Fine Trim/Finishing
- Weight: 0.768kg
- Packaged Size: 347 x 300 x 8mm