Free UK Delivery over £49
Next Working Day Delivery
Trustpilot
Finance Available over £99
Trend KWJ700 Kitchen Worktop Jig 700mm Trend KWJ700 Kitchen Worktop Jig 700mm Trend KWJ700 Kitchen Worktop Jig 700mm Trend KWJ700 Kitchen Worktop Jig 700mm
Trend KWJ700 Kitchen Worktop Jig 700mm

Trend Trend KWJ700 Kitchen Worktop Jig 700mm @10235

SKU
TRE-KWJ700
Product Out of Stock
  • Length: 985mm
  • Width: 390mm
  • Thickness: 12 mm
  • Weight: 5.4 kg
  • End Cut: 45 degrees
  • Corner Radius: 40 mm
  • Corner Radius: 100 mm
  • Corner Radius: 400 mm
  • Corner Mitre Joint: 45 degrees
  • Female cut material width loss: 35 mm

Order by 5:15pm for next working day delivery

Details

Trend KWJ700 KWJ700 Kitchen Worktop Jig 700mm

The Trend KWJ700 Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Trade all in one jig for joining worktops up to 700mm wide with a router.

Features:

  • Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps
  • Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops
  • Cuts up to 40mm thick worktops with or without anti-drip postformed edge
  • Three open-ended bolt recesses (dog bone style) for 150mm bolts
  • Engraved lines for short 65mm bolts and worktop cross-cut
  • 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up
  • Engraved markings for identification of pin holes
  • Pins made from ABS plastic for strength

9 Functions:

  • Female cut
  • Male cut
  • Connector bolt recess
  • Curved peninsular
  • 45° end cut
  • R40mm corner radius
  • R100mm corner radius
  • 45° mitre corner joint
  • 35mm circular hinge and 3/4" BSP hole

Comes with:

  • 6 x ABS Plastic Pins

Jig requires:

  • A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts
  • A template guide bush with 30mm outside diameter
  • A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length
  • Two clamps

Video

Specification

  • Length: 985mm
  • Width: 390mm
  • Thickness: 12 mm
  • Weight: 5.4 kg
  • End Cut: 45 degrees
  • Corner Radius: 40 mm
  • Corner Radius: 100 mm
  • Corner Radius: 400 mm
  • Corner Mitre Joint: 45 degrees
  • Female cut material width loss: 35 mm

Reviews

Add Review