This complete package from Trend contains the T10EK Router, KWJ700 Worktop Jig and PBR01x1/2T/C Cutter with a 12.7mm Diameter
This Trend set, exclusive to Toolstop contains everything you need for cutting worktops. Including the T10EK Router, KWJ700 Worktop Jig and PBR01x1/2T/C Cutter with 12.7mm diameter. The KWJ700 is a hard-wearing 12mm thick jig that cuts up to 40mm thick worktops with or without anti-drip postformed edge. The PBR01x1/2T/C is a two-flute cutter with a half-inch shank, suitable for a wide range of applications such as engraving, grooving rebating and shallow mortising and the T10EK is a powerful router that is up to any task.
T10EK Features:
- Electronic full wave variable control of spindle speed under load for a fine finish on all types of material
- Soft start eliminates sudden movement of machine on start-up
- Two-column precision base with large phosphor bronze bushes for plunging accuracy
- Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied
- Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work
- Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank
- 3-position revolving depth stop for fast adjustable settings
- Adjustable inner plate for guide bush accuracy
KWJ700 Features:
- Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps
- Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops
- Cuts up to 40mm thick worktops with or without anti-drip postformed edge
- Three open-ended bolt recesses (dog bone style) for 150mm bolts
- Engraved lines for short 65mm bolts and worktop cross-cut
- 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up
- Engraved markings for identification of pin holes
- Pins made from ABS plastic for strength
PBR01x1/2T/C Features:
- Microgranular carbide tips
- TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics
- PTFE-coated body minimises resin build-up
- Ideal for cutting kitchen worktops
- Two flutes give a clean finish to cut edges
T10EK Specification:
- Plunge stroke: 0-80 mm
- Power input: 2000w
- Power ampage: 9.6amp
- No-load speed: 8-20000rpm
- Dust spout size: 35mm
- Cutter diameter max: 50 mm
- Sound pressure Lpa: 93.0 dB(A)1
- Acoustic pressure Lwa: 102.0 dB(A)2
- Hand-arm vibration: <2.5m/s2
KWJ700 Specification:
- Length: 985mm
- Width: 390mm
- Thickness: 12 mm
- Weight: 5.4 kg
- End Cut: 45 degrees
- Corner Radius: 40 mm
- Corner Radius: 100 mm
- Corner Radius: 400 mm
- Corner Mitre Joint: 45 degrees
- Female cut material width loss: 35 mm
PBR01x1/2T/C Specification:
- Depth of cut: 50mm
- OL: 93mm
- Shank diameter: 1/2 Inch