V-TUF RAPID VSC 415V hot water pressure washer, with a performance of 2200PSI (150BAR); 15 litres per minute on 415 volt electric supply
The VSC has a super heavy-duty design and is 100% stainless steel covered. It has a compact space-saving design to fit into most vehicles and is easy to maintain with an excellent design to protect the electrics from water ingress. It has a low revving pump motor unit - for increased pump and seal life.
Features:
- Onboard boiler for producing hot water
- All stainless chassis and cover
- Large wheels for easy transport
- Heavy duty 10-metre hose, one-piece, robust gun & lance kit
- Quieter running - Sound Level: up to 10% less than some of its competitors
- Tough, easy running pump - The proven V-TUF XHDM161 low-revving European pump is 160 bar rated with a heavy-duty crankshaft design with hard-wearing ceramic plungers and a brass pump head. Servicing is straight forward and spares availability is excellent
- The XHDM161 pump is lubricated with top specification V-TUF pressure lube( PL500 ) which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine
- Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach
- Adjustable temperature control and cold water switch
- High-efficiency double pass heat exchanger with 3-second purge time offers you hotter water while using less fuel and clean combustion
- The simple strategically placed control panel is easy to operate and has IP56 electric protection
- Automatic stop and start – which increases pump seal life
- Low water burner Cut-Out - reducing expensive damage from water shortage
- Safety pressure valve: visible and direct on the pump (following all European regulations)
- Lance storage holder on the side of the cover
- Electric fuel pump for low fuel protection
- 4 x 10" large robust wheels – ideal for rough terrain
- Quick release KTQ 350 bar Optigun lance system with 10m of hose and Opti-spare 10m KWIK-SWIVEL coupling system,
Chemical injection system
Specification:
- Working pressure (bar): 150
- Max flow (l/min): 15
- Pump type: self-priming
- Boiler – clean burn: diesel fired
- Hot water temp: 40°c - 90°c (steam stage: 150°c)
- Steam stage: yes
- Total stop system: immediate stop type
- Chemical application: yes – injector type
- Motor type: induction
- Power rating: 4000w
- Cable length: 5m
- High-pressure hose: 10m
- Gun and lance kit: yes - KTQ type
- Dimensions l x w x h: 118 x 73 x 72cm
- Weight: 120kg
- Fuel tank size: 24 litre (anti-spill)