This ultimate Dewalt Nail Gun Twin Pack contains both DCN692 Framing (1st Fix) Nailer and DCN660 Finishing (2nd Fix) Nailer so you can complete any nailing task
This is a terrific bundle of 2 Cordless Body Only Nailers from Dewalt. Featuring brushless motors and coming with a Case. Suitable for 1st and 2nd fix jobs, everything is covered with these 2 sterling performers. Contains the DCN692 Framing (1st Fix) Nailer and DCN660 Finishing (2nd Fix) Nailer and a TSTAK Rolling Tool Case. Sold without batteries or charger.
DCN692 Framing (1st Fix) Nailer Features:
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
- Class-leading vibration and sound figures offer fantastic user protection
- Versatile 30 - 34 degree magazine angle will accept most clipped heads, and off-centre round head paper tape or wire weld collated framing nails
- The reversible belt/rafter hook provides increased portability and versatility on the job-site
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Increased visibility and durability along with protection for work surface from the non-mar contact-trip
- Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
- Gas-free operation offers a significant saving in running costs
- Tool-free stall/jam clearance minimises user downtime
- Cordless design so no hanging leads to deal with
- Users can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
DCN660 Finishing (2nd Fix) Nailer Features:
- Benefit from longer runtime, quicker readiness to fire and less recoil
- Brushless motor technology offers the power to fire a 63mm nail into softwood and a 50mm nail into hardwood
- Tool-free stall/jam clearance minimises user downtime
- Mechanical rather than gas operation offers significant cost savings as well as a consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements
- Protective pads to lay the tool down on its head
- The durable magazine accepts 32 to 63mm 16Ga nails
- Mode selector allows for bump or sequential nailing
- LED lights with an error notification
- Easy tool-free clearing of jams and stall release
- Easy depth adjustment with easy-to-read gauge
Comes with:
- 1 x Belt hook (reversible)
- 2 x No mark tips
- TSTAK Rolling Tool Case
Specification:
DCN692 Framing Nailer:
- Nail Diameter: 2.8 - 3.3 mm
- Magazine angle: 30 - 34°
- Magazine loading: Rear-load
- Nail Length: 50 - 90 mm
- Magazine capacity: Up to 55 Nails
- Firing mode: Bump & Sequential
- Length: 345 mm
- Width: 125 mm
- Height: 338 mm
- Nailer Operating Mode: Selective
- Integrated Belt Hook: Yes
- Jam Clearing: Yes
- Impact energy: 105 J
- Temperature Range: -20 to 50°C
- Fault indicator: Yes
- Weight: 4.1 kg
DCN660 Finishing Nailer:
- Nail Diameter: 1.6 (16Ga) mm
- Magazine angle: 20°
- Magazine loading: Rear
- Nail Length: 32 - 63 mm
- Magazine capacity: 110 Nails
- Trigger Type: Bump & Sequential
- Length: 310 mm
- Width: 95 mm
- Height: 305 mm
- Weight: 2.7 kg
- Nailer Operating Mode: Bump and Sequential
- Jam Clearing: Tool-free
- Temperature Range: -20 to 50°C
SKU: DEW-DCK264NT
