This Fein ABLK Nibbler is compact and curve-compatible nibbler for roof and façade construction
This nibbler gives precise cuts in trapezoid and corrugated sheet metals and profiles. It provides optimum handling due to extremely slim gearbox head and is comfortably light weight. The cutting direction setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head. This tool is sold as a Body Only machine without a battery or charger in a robust Carry Case.
Features:
- MultiVolt interface. Cordless tool can be operated with all FEIN Li-ion batteries (12-18 V)
- Brief overlapping area up to 2.6 mm
- Optimum handling due to extremely slim gearbox head
- Comfortably light weight
- QuickIN quick change system for die and punch
- Rotating punch for a service life which is now up to 30 % longer
- Cutting direction setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head
- Proven MultiMaster motor with outstanding performance and stability
- Low operating costs. Punch and die are replaced independently of one another
Comes With:
- 1 die
- 1 punch
- 1 plastic carrying case
Specification:
- Battery voltage: 18 V
- Battery compatibility: Li-ion / HighPower Li-ion
- Battery interface: MultiVolt
- Strokes: 800 - 1,300 rpm
- Cutting speed: 1.5 m/min
- Steel up to 400 N/mm²: 1.6 mm
- Steel up to 600 N/mm²: 1 mm
- Steel up to 800 N/mm²: 0.7 mm
- Non-ferrous metals up to 250 N/mm²: 2.5 mm
- Cutting width: 5mm
- Immersion Ø with die: 22 mm
- Rad. of smallest curve (inside/outside): 30 / 35 mm