Makita DHR242Z 18V SDS Plus Rotary Hammer Drill (Body Only) with 17 Piece Drill & Chisel Set

Makita DHR242Z 18 volt li-ion SDS+ Rotary Hammer - Body Only with Makita D-21200 17 Piece SDS Drilling and Chiselling Accessory Set

This exclusive Toolstop deal consists of the high performance Makita DHR242 SDS 3-mode rotary hammer as well as a comprehensive set of 17 accessories. Everything you'll need for drilling and chiselling tasks.

DHR 242 Rotary Hammer Features:

• Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
• One touch slide chuck for SDS-plus bit
• Easy-to-grip handle
• Ergonomically designed to give maximum power thrust
• Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
• 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
• The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
• High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
• Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

No batteries, charger or kitbox. supplied with DHR202

Machine compatible with Makita BL1830, BL1840 and BL1850 batteries

D-21200 Accessory Set Features:

A Makita drill and chisel set for use with SDS Plus hammer drills. The set is supplied in a foam lined aluminium carry case. Great cutting performance and cost effective too. The ideal accompaniment to an SDS-PLUS drill (with chiselling function) Well suited to concrete, demolition, render, chasing and fixings applications. Satisfied customers who bought these say: "Everything you will need in easy smart carry case, can't buy these bits on their own for cheaper than the set." "Good quality tools."

Specification:

DHR242Z:

• Max in Steel: 13mm
• Max in Wood: 27mm
• Max in Concrete: 24mm
• No Load Speed: 0-950rpm
• Blows per minute: 0-4,700bpm
• Single impact energy: 2.0J
• Vibration: 15/sec2
• Charging Time: Approx 22 min
• Net Weight: 3.3kg

D-21200:

• Drill bits - 5x110mm, 5.5x110mm, 6x110mm, 6x160mm, 7x160mm, 8x110mm, 8x160mm, 8x210mm, 10x110mm, 10x160mm, 10x210mm, 14x260mm
• Bull Point - 140mm and 250mm
• Cold Chisels - 140x20mm and 250x20mm
• Flat Chisel - 250x40mm