This cordless kit from Makita contains the popular DHP483 Combi Drill & DTD155 Impact Driver
The Makita DLX2221ST twin pack features two popular tools from the 18V LXT range, DHP483 Combi Drill & DTD155 Impact Driver, both with brushless motors for optimum power output and long life. The DHP483 has an ultra-compact design with feather lightweight at only 1.6kg and will produce up to 25,500ipm. The DTD155 is a 3 mode impact driver that will produce 140Nm of unbelievable max tightening torque. This model weighs only 1.4kg with a battery!
DHP483 Features:
- 40Nm Max lock torque
- Mechanical 2-speed gearing
- Twin LED Job light with after-glow function
- XPT technology that protects against dust & moisture
- Ultra-compact design with feather lightweight at only 1.6kg
DTD155 Features:
- Lightweight at only 1.4kg with a battery
- 3 modes including low, high and assist mode
- 140Nm of unbelievable max tightening torque
- XPT technology that protects against dust & moisture
- Assist mode stabilises screw whilst fastening into wood
DHP483 Specification:
- Sound power: 94dB(A)
- Vibration drilling: 2.5m/s²
- Sound pressure: 83dB(A)
- Torque settings: 20 + drill
- Chuck capacity: 1.5-13mm
- Vibration hammer drilling: 10m/s²
- Max torque (soft/hard): 23/40Nm
- Max drilling diameter in steel: 13mm
- Max drilling diameter in wood: 36mm
- Max drilling diameter in masonry: 13mm
- Impact rate (1st/2nd gear): 0-7500/25500ipm
- No-load speed (1st/2nd gear): 0-500/1700rpm
DTD155 Specification:
- Driving shank: 1/4" hex
- Standard bolt: M5-M14
- Machine screw: M4-M8
- Sound power: 105 dB(A)
- High tensile bolt: M5-M12
- Sound pressure: 94 dB(A)
- Max fastening torque: 140 Nm
- Coarse thread (length): 22-90mm
- Vibration fastening bolt: 14 m/sec²
- Impact rate (Lo/Hi): 0-1600/3900ipm
- Impact selection: 2 stage + assist mode
- No-load speed (Lo/Hi): 0-1300/3000 rpm
SKU: MAK-DLX2221ST
