Tel: 0800 107 8665 / 01698 819 000

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita DLX2268TJ 18V LXT Brushless Twin Pack - DTW285Z Impact Wrench + DHR242Z Rotary Hammer (2 x 5.0Ah Batteries)

SKU
MAK-DLX2268TJ
£499.00
£415.83 ex. VAT

Makita DLX2268TJ 18V LXT Brushless Twin Pack - DTW285Z Impact Wrench + DHR242Z Rotary Hammer (2 x 5.0Ah Batteries) - 4

Makita DLX2268TJ 18V LXT Brushless Twin Pack - DTW285Z Impact Wrench + DHR242Z Rotary Hammer (2 x 5.0Ah Batteries)

The Makita DLX2268TJ twin pack consists of the DTW285Z Impact Wrench and DHR242Z 24mm Rotary Hammer. The DTW285Z has a new mode called Reverse Rotation Auto Stop Mode which stops rotation after loosening a bolt. The DHR242Z is a high performance cordless combination hammer which accepts SDS+ drill bits. Both models feature a fully brushless motor for improved performance and maximum runtime. The kit comes complete with 2 x 5.0Ah Batteries, DC18RC Charger and Makpac Case with Inlay.

DTW285Z Features:

  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • LED job light will light up the work area in dark conditions
  • Brushless motor for maintenance free and more efficient operation
  • Compact design with overall length of 147mm
  • Phosphorescent bumper
  • Ergonomic soft grip
  • Equipped with Battery protection circuit: designed to protect the battery from damages due to over-discharge, high temperature or overload current
  • Battery fuel gauge
  • Reverse rotation auto stop mode: This mode works only with pulling the trigger fully in a counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds

DHR242Z Features:

  • Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
  • One touch slide chuck for SDS-plus bit
  • Easy-to-grip handle
  • Ergonomically designed to give maximum power thrust
  • Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
  • 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
  • The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
  • High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

Comes With:

  • 2 x 5.0Ah batteries
  • Makpac Case
  • Inlay tray
  • DC18RC Charger
  • DTW285Z - Belt clip
  • DHR242Z - Side handle and depth stop

Specification:

DTW285:

  • Nut Busting Torque: 400 Nm
  • Driving Shank: 1/2" Square
  • Blows per Minute (Hi) - ipm: 0 - 3500 ipm
  • Blows per Minute (Med) - ipm: 0 - 2600 ipm
  • Blows per Minute (Lo) - ipm: 0 - 1800 ipm
  • Standard Bolt: M10-M20
  • High Tensile Bolt: M10-M16
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed (hard/med/soft): 0-2800 / 2100 / 1600 rpm
  • Max Fastening Torque: 280 Nm
  • Vibration: Fastening Bolt: 11.5 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Net weight: 1.7 kg

DHR242Z:

  • Max in Steel: 13mm
  • Max in Wood: 27mm
  • Max in Concrete: 24mm
  • No Load Speed: 0-950rpm
  • Blows per minute: 0-4,700bpm
  • Single impact energy: 2.0J
  • Vibration: 15/sec2
  • Charging Time: Approx 22 min
  • Net Weight: 3.3kg

Videos Hide Videos Show Videos