CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita LS1018L Mitre Saw 10" Slide Compound with Laser 110V

SKU
MAK-LS1018L-110V
£353.99
£294.99 ex. VAT

Out of stock

Makita LS1018L Mitre Saw 10" Slide Compound with Laser

High accuracy cutting with the LS1018L is easily achieved using the Laser Marker. Allows for easy cut alignment and can be turned on or off with an independent switch. The linear ball bearing system is engineered to deliver "spot-on" accurate cuts. A Soft Start ensures a slow build up of blade speed for a smoother more refined operation. The Electric Brake can stop the saw blade rotaion for added safety. A Bevel Range of up to 45 Deg left and right and a Mitre Range of 60 Deg right and 47 Deg left give this Mitre Saw real versatility. Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders and general construction.

Features:

  • Double sliding rails with linear ball bearings on each rail ensures a perfectly smooth and accurate cut
  • Designed for craftsmen and professional joinery shops but tough enough for site use
  • Max cut over 4 " x 12"
  • Can cut over 4 " x 8 " at 45 degrees
  • Angled motor housing ensures clearance for the thicker work-pieces
  • Electronic-power-control maintains constant blade speed under load
  • Adjustable sub-fence
  • Trench cutting facility

Comes with:

  • Vertical Vice

Specification:

  • Max mitre range: 60 to 47 degrees
  • Max bevel range: 45 to 45 degrees
  • Blade Diameter: 260mm
  • Bore Diameter: 30mm
  • No Load Speed: 4.300rpm
  • Input wattage: 1.430
  • Net Weight: 20.7kg