This Toolstop exclusive kit from Trend contains the T10EK Router, LOCK/JIG/B Lock Jig, C172X1/2TC 12mm router cutter and C/CHISEL Corner Chisel
Designed for the professional, this Trend routing kit contains everything needed to get the job done. Contains the best selling T10EK router which is known for its power and performance as well as a lock jig for making mortice locks and latches. The included C/CHISEL Corner Chisel will quickly square up rounded corners when using the lock jig.
T10EK Features:
- Electronic full wave variable control of spindle speed under load for a fine finish on all types of material
- Soft start eliminates sudden movement of machine on start-up
- Two-column precision base with large phosphor bronze bushes for plunging accuracy
- Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied
- Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work
- Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank
- 3-position revolving depth stop for fast adjustable settings
- Adjustable inner plate for guide bush accuracy
LOCK/JIG/B Features:
- Fully adjustable for lock faceplate length up to 250mm
- Quick and easy to set up using engraved lines for lock size and door sizes
- Fast, clean & accurate results on doors even in hardwood
- Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm faceplate widths
- Measuring required for other lock widths
- Engraved on the underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths
- Deeper mortises can be achieved with a suitable size of auger bit
- Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm
C172X1/2TC Features:
- Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising
- Use on softwoods, hardwoods, MDF, plywood, and chipboard
- Cutter has a bottom cut feature
- Highly ground tip ace maintains its edge
- PTFE non-stick coated body
- Extra-long shank
C/CHISEL Features:
- Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates
- Spring-loaded high-speed steel (HSS) anvil for a sharp cut and long life
- Lightweight aluminium body design
- Can be used with the Trend Hinge Jig
- Can be resharpened
T10EK Specification:
- Plunge stroke: 0-80 mm
- Power input: 2000w
- Power ampage: 9.6amp
- No-load speed: 8-20000rpm
- Dust spout size: 35mm
- Cutter diameter max: 50 mm
- Sound pressure Lpa: 93.0 dB(A)1
- Acoustic pressure Lwa: 102.0 dB(A)2
- Hand-arm vibration: <2.5m/s2
LOCK/JIG/B Specification:
- Door thickness min: 30mm
- Door thickness max: 80mm
- Faceplate length min: 30mm
- Faceplate length max: 250mm
- Face Plate Dimension Engraved Widths: 22.5mm and 25.4mm (1")
- Mortise Dimension Engraved Widths: 16mm (5/8") and 19mm (3/4")
C172X1/2TC Specification:
- Diameter: 12mm
- Working length: 63mm
- Overall length: 115mm
- Shank Diameter: 1/2" for use with the Trend Lock Jig
C/CHISEL Specification:
- Length: 70mm
- Width: 29mm