CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Dewalt DCN692P2 18V XR Brushless 2 Speed Framing Nailer(2 x 5.0Ah Batteries)

SKU
DEW-DCN692P2-GB
£365.00
£304.17 ex. VAT

Out of stock

Dewalt DCN692P2 18V XR Brushless 2 Speed Framing Nailer(2 x 5.0Ah Batteries)

The Dewalt DCN692P2 is an extremely versatile framing nailer. Its brushless motor technology offers the power to fire a 90mm ring shank nail in softwood and 63mm into hardwoods. You can expect longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails. The two-speed settings optimise the nailer for firing all lengths of nails and it's mechanical rather than gas operation ensures consistent performance.

Features:

  • Two speeds - or power levels - to optimise the nailer for firing all lengths of nails
  • Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
  • BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
  • The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
  • High capacity 5.0Ah XR battery packs offer eXtreme Runtime in both speeds and versatility to share power with your other 18V XR power tools
  • Mechanical rather than gas operation offers consistent performance at a temperature between -20 and 50 degrees Celcius and minimal cleaning/service requirements
  • Class-leading vibration and sound figures offer fantastic user protection
  • Versatile 30 - 34-degree magazine angle will accept most clipped head, and off-centre round head paper tape or wire weld collated framing nails
  • Reversible belt/rafter hook provides increased portability and versatility on the job-site
  • Depths can be easily adjusted using the thumb wheel depth adjuster
  • Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
  • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
  • Gas free operation offers a significant saving in running costs
  • Tool-free stall/jam clearance minimises user downtime
  • Cordless design allows you to work without the inconvenience and safety risk of trailing leads
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

Comes with:

  • 2 x 5.0Ah XR Li-Ion battery packs with state of charge indicator
  • Multi-voltage XR charger
  • Reversible belt hook
  • Non-mar tip
  • Heavy-duty carrying case

Specification:

  • Nail Diameter: 2.8 - 3.3 mm
  • Magazine angle: 30 - 34°
  • Magazine loading: Rear - load
  • Nail Length: 50 - 90 mm
  • Magazine capacity: Up to 55 Nails
  • Firing mode: Bump & Sequential
  • Length: 345 mm
  • Width: 125 mm
  • Height: 338 mm
  • Nailer Operating Mode: Selective
  • Integrated Belt Hook: Yes
  • Jam Clearing: Yes
  • Impact energy: 105 J
  • Temperature Range: -20 to 50°C
  • Fault indicator: Yes
  • Weight: 4.1 kg

Videos Hide Videos Show Videos