The Draper 98446 Bandsaw tilts with a 0-45 degree range
The Draper 98446 is a quality bench-mounted bandsaw built to a high specification and ideal for trade professionals. The 98446 is designed to cut wood, wood-derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45° range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.
Features:
- Table tilting with 0-45 degree range
- Adjustable blade tensioning and tracking for precise cutting
- Supplied with 10tpi blade, parallel rip fence and other accessories
- Fitted with a no-volt on/off switch and 53mm dust extraction outlet
- Mitre guide for crosscut work. Graduated to 30 degrees for both left and right-hand angles
Comes with:
- 1x Hex key
- 1x Push stick
- 1x 10tpi blade
- 1x Parallel rip fence
- 1x Open-ended spanner
Specifications:
- Input: 300W
- Weight: 19kg
- Voltage: 240V
- Frequency: 50Hz
- Cutting depth: 90mm
- No load speed: 1400rpm
- Maximum capacity: 125mm
- Maximum throat capacity: 228mm
- Table size: 300 x 300mm (Tilt to 45°)
- Cutting speed: 10.6m/sec (635m/min)
- Bandsaw dimensions: 510 x 370 x 755mm
SKU: DRA-98446
