Makita DHP483RMJ 18V LXT Combi Drill (2 x 4.0Ah Batteries) in MakPac Case

With 20 clutch settings and 40Nm of torque, this brushless combi drill sets the standards for cordless drilling

The Makita DHP483 Brushless Compact Combi Drill has a single sleeve keyless chuck and a new battery protection system providing over-discharge, temperature and circuit protection for enhanced performance. The drill has 20 clutch settings that deliver up to 40 Nm of torque. Featuring a variable 2-speed, reversible, brushless motor for more power and longer run time, it has been specially developed for light drilling and screw work. Comes with a DC18RC Charger, 2 x 4.0Ah Batteries and a Type 2 Makpac Connector Case. 

Features:  

• Compact overall length of 176mm 
• Electric brake 
• 2 mechanical gears 
• Variable speed 
• Forward/reverse rotation 
• Twin LED job light 
• Brushless motor 
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand. 
• Ergonomically designed high comfort grip. 
• Belt hook  

Comes With:  

• DC18RC Charger 
• 2 x 4.0Ah Batteries 
• Type 2 Makpac Connector Case  

Specification: 

• Capacity in Steel: 13 mm 
• Capacity in Wood: 36 mm 
• Chuck Capacity: 1.5 - 13 mm 
• Capacity in Masonry: 13 mm 
• Blows per Minute (Hi) - ipm: 0 - 25,500 ipm 
• Blows per Minute (Lo) - ipm: 0 - 7,500 ipm 
• No Load Speed (Hi): 0 - 1,700 rpm 
• No Load Speed (Lo): 0 - 500 rpm 
• Voltage: 18 v 
• Torque Settings: 20 + Drill 
• Battery Type: Lithium-ion 
• Vibration: Drilling: 2.5 m/sec_ 
• Vibration: Hammer Drilling: 10.0 m/sec_ 
• Vibration K factor: 1.5 m/sec_ 
• Noise sound pressure: 83 dB(A) 
• Noise sound power: 94 dB(A) 
• Noise K factor: 3 dB(A) 
• Max. Fastening Torque (Soft Joint): 23 Nm 
• Max. Fastening Torque (Hard Joint): 40 Nm 
• Net weight: 1.6 kg 

SKU: MAK-DHP483RMJ