Makita DK0172G202 40Vmax XGT Combi Drill and Impact Driver Twin Pack (2 x 2.5Ah Batteries) in MakPac Case
The Makita DK0172G202 is a 40Vmax XGT twin pack containing the HP002G Combi Drill and the TD001G Impact Driver. The HP002G has 2 mechanical gears, trigger-operated variable speed control and forward/reverse rotation. The TD001G is a Driver with six assist modes (2x T-modes, 1x Wood mode, 3x Bolt modes). These modes can be quickly and easily switched between with the in-built memory function. This twin pack comes with 2 x 2.5Ah batteries, DC40RA charger and a MakPac Case.
Features:
HP002G:
- Brushless motor provides the highest power output
- Electric brake
- 2 mechanical gears
- Constant speed control
- Variable speed control by trigger
- Forward/reverse rotation
- LED job light for illumination of the workpiece
- Keyless Chuck for easy accessory changes
- Aluminium gear housing and all-metal gear construction provides longer life and durability
- Ergonomic soft grip
- Belt clip
TD001G:
- Electronic 4-stage impact power selection and 6 Assist Modes (2x T-modes, 1x Wood mode, 3x Bolt modes)
- The fully brushless motor increases runtime and provides a higher power output for the most demanding tasks
- Electric brake for optimum user safety upon use
- Variable speed control by trigger
- Constant speed control
- Quick mode switching function with memory function
- Forward / reverse rotation
- LED job light to illuminate the workpiece
- Ergonomically designed high comfort grip allows for comfortable working all day long
- One-touch sliding chuck for easy bit installation and removal
Comes With:
- 2 x 2.5Ah Batteries
- DC40RA Charger
- MakPac Case
Specification:
HP002G:
- Capacity in Steel: 13mm
- Capacity in Wood: 38mm
- Capacity in Masonry: 13mm
- No Load Speed: (Hi) 0 - 2,200 rpm, (Lo) 0 - 600 rpm
- Blows per Minute: (Hi) 0 - 33,000 ipm, (Lo) 0 - 9,000 ipm
- Torque Settings: 21+Drill
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 87 dB(A)
- Noise sound power: 98 dB(A)
- Noise K factor: 3 dB(A)
- Net weight: 2 - 2.6 kg
- Max. Fastening Torque: (Soft Joint) 30 Nm, (Hard Joint) 64 Nm
- Vibration: Impact drilling into concrete: 9 m/sec²
- Vibration: Drilling into metal: 2.5 m/sec²
TD001G:
- Standard Bolt: M5-M16
- High Tensile Bolt: M5 – M14
- Coarse thread (length): 22 - 125 mm
- Max Fastening Torque: 220 Nm
- Blows per Minute (Max): 0 - 4,400 ipm
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 96 dB(A)
- Noise sound power: 107 dB(A)
- Noise K factor: 3 dB(A)
- No Load Speed (max/hard/med/soft): 0- 3700 / 3200 / 2100 / 1100 rpm
- Vibration: Impact tightening of fasteners @ max capacity: 10.0 m/sec²
- Driving Shank: 6.35mm (1/4") Hex
- Blows per Minute (Hi): 0 - 3,600 ipm
- Blows per Minute (Med): ipm 0 - 2,600 ipm
- Blows per Minute (Lo): 0 - 1,100 ipm
- Machine Screw: M4 – M8
SKU: MAK-DK0172G202
