CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

CORONAVIRUS - For the safety of our staff and the wider public, we have decided to take our website offline and not accept orders. We hope you understand that we wish to minimise the risk of spreading the COVID-19 virus. Apologies for any inconvenience. We would urge you to support your LOCAL INDEPENDENT TOOL STORE if possible during this time of crisis.

Makita DLX5042PT 18V LXT Brushless 5 Piece Cordless Kit (3 x 5.0Ah Batteries)

SKU
MAK-DLX5042PT
£669.00
£557.50 ex. VAT

Out of stock

Makita DLX5042PT 18V LXT Brushless 5 Piece Cordless Kit (3 x 5.0Ah Batteries)

The Makita DLX5042PT 5 piece kit is a comprehensive set of premium cordless power tools featuring Lithium Ion Technology. It consists of a DHP484Z Hammer Driver Drill, DTD153Z Impact Driver, DGA456Z 115mm Angle Grinder, DHR242Z SDS+ Rotary Hammer 24mm and a DML186 LED Flashlight. Also comes with an 831279-0 Tool Bag, 3 x 5.0Ah 18V Batteries and DC18RD Dual Port Fast Charger.

DHP484Z Features:

  • Brushless motor
  • Electric brake
  • 2 mechanical gears.
  • Variable speed control by trigger
  • Forward/reverse rotation
  • LED job light
  • Compact Overall Length of 182mm
  • Keyless Chuck
  • Aluminium Gear Housing
  • All metal gear construction
  • Ergonomic soft grip

DTD153Z:

  • Brushless motor
  • One touch sliding chuck
  • LED job light
  • Ergonomic soft grip
  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • Compact overall length

 DGA456Z:

  • Electric brake
  • Brushless motor
  • Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation
  • High power motor
  • Anti-restart function.
  • Soft start feature.
  • Battery fuel gauge
  • Rubberised soft grip.
  • Electronic current limiter for overload protection.
  • Slide switch conveniently located for one hand operation.

DHR242Z:

  • Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200.
  • One touch slide chuck for SDS-plus bit.
  • Easy-to-grip handle ergonomically designed to: • give maximum power thrust. • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
  • 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
  • The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
  • Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.

DML186Z:

  • LED bulbs provide high efficiency and long life
  • Compact design for high portability
  • 6 high-efficiency LEDs for long continuous bright illumination

Comes With:

  • 3 x 5.0Ah 18V Batteries
  • DC18RD Dual Port Fast Charger
  • 831279-0 Tool Bag

Specification:

DHP484Z:

  • Capacity in Steel: 13 mm
  • Capacity in Wood: 38 mm
  • Chuck Capacity: 1.5 - 13 mm
  • Capacity in Masonry: 13 mm
  • Blows per Minute (Hi) - ipm: 0 - 30,000 ipm
  • Blows per Minute (Lo) - ipm: 0 - 7,500 ipm
  • Noise sound pressure: 88 dB(A)
  • Noise sound power: 99 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed (Hi): 0 - 2,000 rpm
  • No Load Speed (Lo): 0 - 500 rpm
  • Torque Settings: 21 + drill
  • Max. Fastening Torque (Soft Joint): 30 Nm
  • Max. Fastening Torque (Hard Joint): 54 Nm
  • Vibration K factor: 1.5 m/sec_
  • Vibration: Impact drilling into concrete: 8.0 m/sec_
  • Vibration: Drilling into metal: 2.5 m/sec_
  • Net weight: 1.8 kg

DTD153Z:

  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M14
  • Coarse thread (length): 22 - 125 mm
  • Max Fastening Torque: 170 Nm
  • No Load Speed: 0 - 3400 rpm
  • Vibration: Fastening Bolt: 13.0 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • Net weight: 1.5 kg
  • Driving Shank: 6.35mm (1/4") Hex
  • Machine Screw: M4-M8
  • Impacts per Minute: 0 - 3,600 ipm

DGA456Z:

 
  • Bore Diameter:  22.23 mm
  • Max Wheel Thickness:  6 mm
  • Noise sound pressure:  79 dB(A)
  • Noise K factor:  3 dB(A)
  • Max Wheel Diameter:  115 mm
  • No Load Speed:  8,500 rpm
  • Vibration K factor:  1.5 m/sec²
  • Vibration: Surface Grinding:  6.5 m/sec²
  • Vibration: Disc Sanding:  2.5 m/sec²
  • Net weight:  2.6 kg

DHR242Z:

 
 
  • Capacity in Concrete:  24 mm
  • Capacity in Steel:  13 mm
  • Capacity in Wood:  27 mm
  • Impact energy:  2.0 J
  • Blows per minute:  0 - 4700 bpm
  • No Load Speed (Hi):  0 - 950 rpm
  • Vibration: Drilling:  3.5 m/sec²
  • Vibration K factor:  1.5 m/sec²
  • Vibration: Hammer Drilling:  13.5 m/sec²
  • Vibration: Chiselling:  10.5 m/sec²
  • Net weight:  3.1 - 3.8 kg

DML186Z:

  • Battery Type: Li-ion
  • Voltage: 18v