The Sealey INVMIG200LCD Inverter Welder can save up to four setups
The Sealey INVMIG200LCD is an Inverter Welder that is switchable between MIG, TIG or MMA welding modes. First, select type of welding, you will be advised of the gas mixture and polarity recommended. Input electrode or wire thickness, completing the set-up with the material thickness, you are then ready to start welding. The inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg.
Features:
- Switchable between MIG, TIG or MMA welding modes
- Polarity change terminals allow for MIG or flux-cored welding
- Up to four setups can be saved on the machine for fast loading
- Fully functional LCD front panel with easy to follow assisted set-up
- 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc)
- Wire feed control for adjusting speed of wire fed through the torch during welding
- Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg
- Thermal overload warning tells you to switch off when it exceeds maximum temperature
- Suitable for arc welding a variety of rods including rutile, basic and stainless from 1.6 to 4mm
- Includes 3m MIG torch, 3m earth cable, gas hose, regulator and 0.6, 0.8, 0.9, 1mm contact tips
- Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys
- Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency
- First, select type of welding, you will be advised the gas mixture and polarity recommended. Input electrode or wire thickness, completing the set up with the material thickness, you are then ready to start welding
Specification:
- Protection: H
- Weight: 20kg
- Supply: 240V
- Insulation: IP21S
- Wire Capacity: 5kg
- Absorbed Power: 8.6kW
- Model No: INVMIG200LCD
- TIG: 20%@180A, 100%@80A
- MIG: 20%@200A, 100%@89A
- Electrode Capacity: ∅1.6-4mm
- MMA (Arc): 20%@180A, 100%@80A
- TIG Accessory Kit (Optional): TIG10S
- MMA Accessory Kit (Optional): MMA01
- MIG Torch: Euro Non-Live BINZEL MB15
SKU: SEA-INVMIG200LCD
