Metabo SBEV1100-2S Impact Drill 1100W in Case 110V

Metabo SBEV1100-2S Impact Drill 1100W in Case 110V

The Metabo SBEV1100-2S Impact Drill has a huge amount of power which is highly controllable for different applications. Boasting Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load. Also fitted with selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces. The machine is sold in 110V and 240V models with a Side Handle and Depth Stop in a Carry Case.

Features:

• Thumbwheel for Speed Preselection
• Robust die-cast aluminium gear housing for optimum heat dissipation and long service life
• Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
• Metabo Marathon-motor with dust protection for long service life
• Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
• Forward and reverse rotation
• Keyless chuck and spindle stop gear for convenient one-handed tool change
• Spindle with hexagonal recess for screwdriver bits for working without chuck
• Overload protection: protects the motor from overheating
• Restart protection: prevents unintentional start-up after power supply interruption
• Cable-protecting ball joint for optimal freedom of motion when working
• Wear Indication for Carbon Brush

Comes With:

• Futuro Plus keyless chuck
• Rubber-coated side handle
• Drilling depth guide
• Plastic carry case

Specification:

• Rated input power:  1100 W
• Output power:  580 W
• Maximum torque:  42 / 15 Nm
• Drill-Ø masonry:  24 mm
• Drill-Ø concrete:  22 mm
• Drill Ø steel:  16 / 10 mm
• Drill-Ø soft wood:  40 / 25 mm
• No-load speed:  0 - 1100 / 0 - 3100 rpm
• Revolutions at rated load:  1100 / 3100 rpm
• Maximum impact rate:  58900 bpm
• Gears:  2
• Chuck capacity:  1.5 - 13 mm
• Collar diameter:  43 mm
• Drill spindle with hexagonal recess:  6.35 mm
• Drill spindle thread:  1/2 " - 20 UNF
• Chuck clamping type:  Keyless chuck
• Weight (without power cable):  2.8 kg
• Cable length:  4 m
• Vibration:
• Drilling in metal:  4.2 m/s²
• Uncertainty of measurement K:  1.5 m/s²
• Impact drilling concrete:  17 m/s²
• Uncertainty of measurement K:  1.5 m/s²
• Noise emission:
• Sound pressure level:  103 dB(A)
• Sound power level (LwA):  114 dB(A)
• Uncertainty of measurement K:  3 dB(A)